• Support for aid in processing and application
  • Easily conforms to various surface types
  • High tack and good shear properties
  • Stable to EtO and gamma sterilization
  • Low COF for hand apply applications
  • Good dimensional stability and moisture Resistance
Unit of Measure

Specifications

Liner

N/A 76 lb Polycoated Bleached Kraft, Silicone Treated on Both Sides.

Liner Side Adhesive

N/A Non-Sensitizing Acrylic (M109)

Backing/Carrier

N/A 0.5 mil Polyester Film

Air Side Adhesive

N/A Non-Sensitizing Acrylic (M109)

Recommended Storage Humidity Conditions

N/A 40 to 60 %

Recommended Storage Temperature Conditions

N/A 60 to 80 ºF

Tape Features

N/A Double Coated

Typical Test Values

Total Thickness with Liner

N/A 8.8 mil0.224 mm

Test Method for Total Thickness with Liner

N/A PSTC-133

Adhesive Thickness (Air Side)

N/A 1.4 mil0.036 mm

Test Method for Adhesive Thickness (Air Side)

N/A PSTC-133

Carrier Thickness

N/A 0.5 mil0.013 mm

Test Method for Carrier Thickness

N/A PSTC-133

Adhesive Thickness (Liner Side)

N/A 1.4 mil0.036 mm

Test Method for Adhesive Thickness (Liner Side)

N/A PSTC-133

Liner Thickness

N/A 5.5 mil0.140 mm

Test Method for Liner Thickness

N/A PSTC-133

Adhesion to Steel (Air Side)

N/A 130 oz/in14.22 N/cm

Test Method for Adhesion to Steel (Air Side)

N/A PSTC-101 Mod

Adhesion to Steel (Liner Side)

N/A 145 oz/in15.86 N/cm

Test Method for Adhesion to Steel (Liner Side)

N/A PSTC-101 Mod

Shear Strength Time

N/A <24 h

Laminating Temperature

N/A 50 to 150 ºF10 to 65 ºC

Maximum Continuous Use Temperature

N/A 160 ºF71 ºC

Maximum Intermittent Temperature

N/A 180 ºF

Intermittent Use Temperature

N/A 82 ºC

Applications

Applications

N/A
  • Medical device attachment
  • Medical device assembly

Product Safety

Product Safety

N/A The base adhesives in this medical product have been tested in accordance with ISO 10993 and found to be non-cytotoxic, non-sensitizing, and non-irritating. The adhesive in this product has also been tested on humans via Repeat Insult Patch Test and did not induce irritation or allergic contact dermatitis in subjects.

In accordance with FDA Cgmp requirements, NADCO® reminds the customer that ultimately fitness for use must be determined by the manufacturer of the finished device.