800.839.9018neil@nadcoinc.com
NADCO®'s 7432M is a 1/32" (0.8 mm) white polyethylene foam tape coated on both sides with a medical grade acrylic adhesive system designed for skin contact medical applications. The highly conformable foam, coupled with a high performance medical grade adhesive, creates a reliable bond for mounting electrodes, grounding pads and other devices to human skin.
Unit of Measure

Specifications

Product Construction Material

N/A Acrylic Adhesive Polyethylene Foam Release Liner

Test Method for Product Thickness

N/A PSTC-133

Adhesive Thickness (Exposed)

N/A 1.8 mil0.05 mm

Adhesive Thickness (Liner)

N/A 1.8 mil0.05 mm

Peel Adhesion (Exposed) at 20 Minute (min) Dwell Time

N/A 50 oz/in13.9 N25 mm

Test Method for Peel Adhesion (Exposed) at 20 Minute (min) Dwell Time

N/A PSTC-101

Peel Adhesion (Liner) at 20 Minute (min) Dwell Time

N/A 50 oz/in13.9 N25 mm

Test Method for Peel Adhesion (Liner) at 20 Minute (min) Dwell Time

N/A PSTC-101

Shear Adhesion Time at 2.2 Pounds per Square Inch (psi) and 15.2 kilopascal (kPa) Pressure

N/A >24 h

Shear Adhesion Pressure

N/A 2.2 psi15.2 kPa

Test Method for Shear Adhesion

N/A PSTC-107

Tensile Strength

N/A 5 lb/in22.6 N25 mm

Test Method for Tensile Strength

N/A PSTC-131

Elongation

N/A 400 %

Service Temperature Range

N/A -40 to 200 ºF-40 to 93 ºC

Dwell Time

N/A 20 min

Material

N/A Foam

Industry Focus

N/A Medical

Tape Features

N/A Double Coated

Product Configurations

Product Configurations

N/A
  • Standard roll sizes and custom rolls available on request

Features & Benefits

Features & Benefits

N/A
  • Utilizes medical adhesive type M-103
  • Cytotoxicity and primary skin contact tested
  • Bonds well to skin and will not lift under stress conditions
  • Medium density polyethylene foam combines conformability with easy installation
  • Provides a strong, reliable, moisture resistant bond
  • Excellent temperature resistance and humidity performance

Note

Note

N/A Typical values are not intended to be used for specification development. Technical data is believed to be true and accurate; NADCO® recommends that the purchaser test for fitness of use in all applications.
^