800.839.9018neil@nadcoinc.com
1163 Double Coated Tape is a 6.5 mil double coated tape utilizing a 0.5 mil hand-tearable polyester film heavily coated on both sides with 3 mils of an ultra high peel acrylic adhesive system. The heavy adhesive deposition allows for superior bonding and conformability to irregular as well as at surfaces. The special acrylic adhesive, bonds well to most substrates including low surface energy plastics. This product provides excellent U.V. and heat resistance. Super aggressive splicing tape for demanding applications.
Unit of Measure

Specifications

Tape Features

N/A Double Coated

Environmental Capabilities

N/A Heat Resistant Ultra Violet (UV) Resistant

Ideal Tape Application Temperature Range

N/A 70 to 100 ºF21 to 38 ºC

Construction

Carrier Material

N/A Polyester

Adhesive Material

N/A Acrylic

Total Thickness Excluding Liner

N/A 6.5 mil165 µ

Tape Thickness

N/A 3.0 mil76 µ

Carrier Thickness

N/A 0.5 mil13 µ

Release Liner

N/A 55# Glassine

Tape Color

N/A Clear

Typical Physical Properties

Adhesion to Steel1 N/A 120 oz/in34.0 N/25 mm

Minimum Continuous Relative Operating Temperature

N/A -40 ºF-40 ºC

Maximum Continuous Relative Operating Application Temperature

N/A 200 ºF93 ºC

Note for Physical Properties

N/A The technical information and data should be considered representative or typical only and should not be used for specification purposes.

Typical values are not intended to be used for specification development. Technical data is believed to be true and accurate.

Applications

Applications

N/A For bonding irregular surfaces, bonding to plastics and metal profile extrusions, bonding of decorative trim; also used as a universal all-purpose double coated tape. Used extensively for seaming vinyl banners.

Application Techniques

Application Techniques

N/A Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.

To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.

Ideal tape application temperature range is 70 ºF to 100 ºF (21 ºC to 38 ºC). Initial tape application to surfaces at temperatures below 50 ºF (10 ºC) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

Note for Application Techniques

N/A Carefully read and follow the manufacturer's precautions and directions for use when using solvents.

Storage

Storage

N/A Store in original cartons at 70 ºF (21 ºC) and 50 % relative humidity.

Shelf Life

Shelf Life

N/A If stored under proper conditions, product retains its performance and properties for two years from date of manufacture.

Certification/Recognition

Certification/Recognition

N/A MSDS: NADCO® has not prepared an MSDS for this product which is not subject to the MSDS requirements of the Occupational Safety and Health Administration's Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the NADCO® directions for use, this product should not present a health and safety hazard. However, use or processing of this product in a manner not in accordance with the directions for use may affect its performance and present potential health and safety hazards.

TSCA: This product is not defined as an article under the Toxic Substances Control Act and therefore, it is exempt from inventory listing requirements.

Product Use

Product Use

N/A All statements, technical information and recommendations contained in this document are based upon tests or experience that NADCO® believes are reliable. However, many factors beyond NADCO® control can affect the use and performance of a NADCO® product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the NADCO® product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Warranty, Limited Remedy, and Disclaimer

Warranty, Limited Remedy, and Disclaimer

N/A Unless stated otherwise in NADCO® product literature, packaging inserts or product packaging for individual products, NADCO® warrants that each NADCO® product meets the applicable specifications at the time NADCO® ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. NADCO® makes no other warranties, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose or any implied warranty arising out of a course of dealing, custom or usage of trade. User is responsible for determining whether the NADCO® product is fit for a particular purpose and suitable for user's application. If the NADCO® product is defective within the warranty period, your exclusive remedy and NADCO®'s and seller's sole obligation will be, at NADCO®'s option, to replace the product or refund the purchase price.

Limitation of Liability

Limitation of Liability

N/A Except where prohibited by law, NADCO® and seller will not be liable for any loss or damage arising from the NADCO® product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
  • 1 Initial, 12 in./min.
^