800.839.9018neil@nadcoinc.com
3232 is a 1/32" thick white closed cell, cross-linked polyethylene foam coated on both sides with a high performance acrylic based adhesive with a white kraft liner.
Unit of Measure

Specifications

Color

N/A White

Materials

N/A Foam Polyethylene (PE)

Product Taped

N/A Muntin Bars

Tape Features

N/A Double Coated

Properties

Peel Adhesion Strength1 N/A 75 oz/in0.8175 N/mm

Test Method for Peel Adhesion Strength

N/A PSTC-101
Tack Weight2 N/A 28 oz800 g

Test Method for Tack Weight

N/A ASTM D2979

Tensile Strength

N/A 107 oz/in11.61 N/10 mm

Test Method for Tensile Strength

N/A PSTC-131

Elongation

N/A 355 %

Test Method for Elongation

N/A PSTC-131

Minimum Application Temperature

N/A 10 ºF-12 ºC
Maximum Continuous Use Temperature3 N/A 180 ºF82 ºC

Maximum Short Term Exposure Temperature

N/A 203 ºF95 ºC

Typical Applications

Typical Applications

N/A Plastic Extrusion Signage Trim and Simulated Divided Lite (SDL) (Muntin Bars) Wire Mounts Wire Raceways

Features & Benefits

Features & Benefits

N/A
  • Easily die cut
  • Low application temperature
  • Great chemical resistance
  • Low compression set
  • Good conformability, cushioning, & vibration dampening
  • UL certified to QOQW2 Polymeric Adhesive Systems, Electrical Eq

Note

Note

N/A For maximum adhesion, bonding surfaces should be clean, dry, and free from grease and oils. The firmer the application pressure and the greater the contact area, the stronger the bond. Bond strengths will increase as a function of time as the adhesive continues to wet out the bonding surfaces.
  • 1 Foam Destruction
  • 2 Tack numbers may not be exact value of tack as foam can tear during tack test
  • 3 The pressure sensitive adhesive used in this tape construction will perform at higher than the listed temperatures. The temperature limits are due to the polyolefin foam substrate.
^