Unit of Measure
Specifications
Total Product Caliper Thickness |
N/A 6.7 mil |
Product Basis Weight Per Million Square Inches of Material (MMSI) |
N/A 239.07 lb |
Face Stock
Facestock Information (308) |
N/A A 308 paper designed to provide a high level of destructibility when combined with the appropriate adhesive. This facestock has sufficient strength properties, such as tensile and tear, to permit good performance on press. |
Basis Weight (Facestock) |
N/A 56 lb/3300 ft² |
Paper Caliper Thickness (Facestock) |
N/A 3.6 mil |
Tensile Strength Machine Direction (MD) (Facestock) |
N/A 34 lb/in |
Tensile Strength Cross Direction (CD) (Facestock) |
N/A 16 lb/in |
Tear Strength Machine Direction (MD) (Facestock) |
N/A 53 g |
Tear Strength Cross Direction (CD) (Facestock) |
N/A 66 g |
Opacity (Facestock) |
N/A 90 % |
Sheffield Smoothness (Facestock) |
N/A 125 SFU |
Parker Print (Facestock) |
N/A 1.07 µm |
Adhesive
Adhesive Information (BP-164) |
N/A A general purpose hot melt adhesive with excellent quick-stick properties. This adhesive exhibits excellent adhesion to a broad range of packaging surfaces and has improved die cutting and stripping attributes compared to other hot melt rubber based adhesives. |
Coat Weight (Adhesive) |
N/A 14 lb/3300 ft² 20.72 g/m² |
Paper Caliper Thickness (Adhesive) |
N/A 0.6 mil |
Adhesion to Stainless Steel (Adhesive) |
N/A Platinum (PT) |
Peel Angle (Adhesive) |
N/A 90 º |
Loop Tack (Adhesive) |
N/A Platinum (PT) |
Service Temperature (Adhesive) |
N/A -50 to 150 ºF |
Minimum Application Temperature (Adhesive) |
N/A 40 ºF |
Shear Strength (Adhesive) |
N/A 1000 g |
Shear Time (Adhesive) |
N/A 255 min |
Shelf Life at 75 Degree Fahrenheit (ºF) Temperature and 50 Percent (%) Relative Humidity (Adhesive) |
N/A 1 y |
Release Liner
Release Liner Information (40# BK) |
N/A A bleached kraft liner featuring excellent die cutting and stripping characteristics. |
Basis Weight (Release Liner) |
N/A 36 lb/3000 ft² |
Paper Caliper Thickness (Release Liner) |
N/A 2.5 mil |
Tensile Strength Machine Direction (MD) (Release Liner) |
N/A 35 lb/in |
Tensile Strength Cross Direction (CD) (Release Liner) |
N/A 15 lb/in |
Tear Strength Machine Direction (MD) (Release Liner) |
N/A 42 g |
Tear Strength Cross Direction (CD) (Release Liner) |
N/A 48 g |
Opacity (Release Liner) |
N/A 64 % |
Important Notice
Important Notice |
N/A
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*). All trademarks are the property of their respective owners. All information, recommendations for use, product designations, and descriptive materials about NADCO® products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by NADCO®. Because of the variety of possible applications for NADCO® products and the continuing development of new applications, all NADCO® products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application. NADCO® will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information. |