800.839.9018neil@nadcoinc.com
A strong 10 mil (250 micron), transparent ultra high molecular weight polyethylene film coated with a high peel, high shear, rubber-based pressure sensitive adhesive.
Unit of Measure

Technical Data

Film Thickness (Excluding Liner)

N/A 11.5 mil0.0115 in0.2918 mm

Test Method for Peel Adhesion Width

N/A PSTC - 1

Shear Adhesion Pressure at 24 Hours/Minutes (hr/min) (PSTC-7)

N/A 1.1 psi7.59 kPa

Test Method for Shear Adhesion Pressure at 24 Hours/Minutes (hr/min)

N/A PSTC-7

Tensile Width

N/A 60 lb./in271.8 N/2.5 cm

Elongation

N/A 300 %

Maximum Continuous Use Temperature

N/A 175 ºF80 ºC

Minimum Application Temperature

N/A 50 ºF10 ºC

Release Liner

N/A 92 lb150 g/m²

Coefficient of Friction, Kinetic

N/A 0.11 to 0.14

Specifications

Peel Adhesion Width (PSTC-1)

N/A 60 oz/in16.9 N/2.5 cm

Film Thickness

N/A 10 mil250 µ

Film Type

N/A Ultra High Molecular Weight Polyethylene (UHMWPE)

Applications

Applications

N/A Primarily designed for abrasion resistant applications such as guide rails, conveyors, etc. It replaces Polytetrafluoroethylene (PTFE) tapes in many areas where high temperature resistance is not required.

Important Information

Important Information

N/A The information cited is in good faith and has been established from sources held to be secure and reliable. The values listed are typical properties and are not intended to be used as specifications for defined applications. User must determine the product suitability for the end use application and assume all risks and liabilities.
^