711-2 Flexible Prismatic Conspicuity Markings Series 963 are highly retroreflective flexible microprismatic markings designed to mark the sides and rear of vehicles for enhanced visibility and detection. The reflective marking consists of prismatic lenses that are formed in a transparent, synthetic resin, reflectorized and backed with a pressure sensitive adhesive and paper liner. Series 963 meets or exceed all FMVSS 108 requirements.
Unit of Measure
Specifications
|
Minimum Coefficient of Retroreflection (RA) for New Sheeting
|
Typical Physical Properties
|
Coefficient of Retroreflection
|
Easy to Apply
|
Features
Specifications
Color |
N/A Red White |
Alternating Pattern Size for Red Color |
N/A 6 in |
Alternating Pattern Size for White Color |
N/A 6 in |
Tape Width |
N/A 2 in |
Tape Roll Length |
N/A 50 yd |
Department of Transportation (DOT) Mark |
N/A Yes |
Observation Angle1 | N/A 0.2 º0.5 º |
Entrance Angle2 | N/A -4 º30 º45 º |
Warranty |
N/A 5 y |
Type |
N/A Conspicuity Marking |
Minimum Coefficient of Retroreflection (RA) for New Sheeting
Minimum Coefficient of Retroreflection (RA) at -4 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for White Color |
N/A 250 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at -4 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for Red Color |
N/A 60 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 30 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for White Color |
N/A 250 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 30 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for Red Color |
N/A 60 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 45 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for White Color |
N/A 60 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 45 Degree (º) Entrance Angle and 0.2 Degree (º) Observation Angle for Red Color |
N/A 15 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at -4 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for White Color |
N/A 65 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at -4 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for Red Color |
N/A 15 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 30 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for White Color |
N/A 65 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 30 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for Red Color |
N/A 15 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 45 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for White Color |
N/A 15 cd/lux/m² |
Minimum Coefficient of Retroreflection (RA) at 45 Degree (º) Entrance Angle and 0.5 Degree (º) Observation Angle for Red Color |
N/A 4 cd/lux/m² |
Typical Physical Properties
Thickness |
N/A 0.010 to 0.014 in0.25 to 0.36 mm |
Gloss Value at 85 Degree (º) Angle (ASTM D523) |
N/A 100 |
Test Method for Gloss Value |
N/A ASTM D523 |
Test Method for Whiteness |
N/A ASTM E1164 |
Dimensional Stability at Change on 9 x 9 Panel Size (ASTM D4956) |
N/A <0.125 in |
Test Method for Dimensional Stability |
N/A ASTM D4956 |
Flexibility of 0.125 Inch (in) Mandrel Size at 32 Degree Fahrenheit (ºF)/ 0 Degree Celsius (ºC) |
N/A No Cracking |
Mandrel Size at 32 Degree Fahrenheit (ºF)/0 Degree Celsius (ºC) Temperature |
N/A 0.125 in |
High Pressure Wash Test Angle |
N/A 45 º |
High Pressure Wash Test |
N/A 1200 psi |
High Pressure Wash Test Distance |
N/A 8 in |
High Pressure Wash Test at 45 Degree (º) Angle, 1200 Pound per Square Inch (psi) Pressure, and 8 Inch (in) Distance |
N/A No Delamination from Panel |
Adhesion Hanging Weight Angle |
N/A 90 º |
Adhesion 90 Degree (º) Hanging Weight Angle Movement |
N/A <2 in<55 mm |
Test Method for Adhesion 90 Degree (º) Hanging Weight Angle Movement |
N/A ASTM D4956 |
Minimum Application Temperature |
N/A 50 ºF10 ºC |
Instron Peel Adhesion Strength at 12 Inch/Minute (in/min) and 90 Degree (º) Pullback |
N/A 3.0 lb/inGreater on Typical Substrates |
Pullback Angle |
N/A 90 º |
Chemical Resistance |
N/A Not affected by Toluene, #2 Diesel Fuel, Gasoline, Kerosene, TSP Detergent, Xylene, and Dilute Metal Brighteners |
Corrosion Resistance (Salt Spray) (ASTM B-117) |
N/A No Effect in 1000 Hours |
Test Method for Corrosion Resistance (Salt Spray) |
N/A ASTM B-117 |
Impact Resistance for Room Temperature, 100 Inch/Pound (in/lb) and 5/8 Inch (in) Tip |
N/A No Damage Outside Impact Area |
Impact Resistance for Cold temperature, 60 Inch/Pound (in/lb) at -20 Degree Fahrenheit (ºF) |
N/A No Damage Outside Impact Area |
Coefficient of Retroreflection
Coefficient of Retroreflection |
N/A The minimum coefficient of retroreflection values of these sheetings when new are given in table A in terms of candelas per lux per square meter. Measurements are made from samples applied to an aluminum panel in accordance with ASTM E-810 "Standard Test Method for Coefficient of Retroreflective Sheeting" and represent an average of values at 0 and 90 degree orientations. |
- 1 The angle formed by the light beam striking the reflective surface and the light beam returning to observer.
- 2 The angle formed by a light beam striking a surface at a point and a line perpendicular to the surface at the same point.