Search Catalog
      GO   
 All Categories    711 Reflective Tapes
All Categories > Search By Application > Safety Tapes > Reflective Tapes > 711 Reflective Tapes  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

711 Reflective Tapes


711-2 Series Reflective Tape is a high quality, durable, self-adhesive, prismatic lens retroreflective material. It is designed for use on vehicles for easy nighttime vehicle recognition.




Construction  · Physical Properties  · Specifications  · Minimum Reflectivity Level  · Typical Reflectivity Level  · Colors & Specification Limits (Daytime)

Construction

Face Film
Acrylic Prismatic Reflective Film

Adhesive
Repositionable, permanent, acrylic pressure sensitive


Physical Properties

Outdoor Durability
7 years when properly processed and applied (vertical exposure).

Minimum Surface/Ambient Air Application Temperature
+60°F (16°C) for standard temperature adhesive 0°F (-18°C) for low temperature adhesive

Application Surface
Recommended for flat metal of painted metal surfaces only. This product is not warranted for application to Stainless Steel

Service Temperature Range
-10°F to +160°F (-23°C to 72°C)

Typical Film Caliper (w/adhesive)
12.5 to 14.0 mils (318 µm to 356 µm)

Specification
Meets or exceeds applicable requirements mentioned in NHTSA amendment FMVSS #108 (49 CFR 571) and carries "DOT-C2" certification

Peel Adhesion

 View
180°

Substrate Adhesion1

 View
4.0 lb/in (700 N/m)

Shelf Life
One year when stored at 73°F (23°C) and 50% ± 5% R.H.
1 15 min


Specifications

Available Color Configurations
6 inch white/6 inch red stripe
7 inch white/11 inch red stripe
White Only (DOT-C2 watermark)

Available Product Configurations
2 inch by 50 yd. rolls
2 inch precut rolls


Minimum Reflectivity Level
Observation Angle Entrance Angle White Sheeting Red Sheeting
0.2° -4° 250 60
0.2° 30° 250 60
0.2° 45° 60 15
0.5° -4° 65 15
0.5° 30° 65 15
0.5° 45° 15 4




Typical Reflectivity Level
Observation Angle Entrance Angle White Sheeting Red Sheeting
0.2° -4° 750 170
0.2° 30° 500 110
0.2° 45° 310 70
0.5° -4° 230 52
0.5° 30° 120 26
0.5° 45° 82 18




Colors & Specification Limits (Daytime)
    The initial daytime (D65 light source) color of V-5720 Series Sheeting shall conform to the requirements identified in the table below. Tested in accordance to ASTM D-4956-05 {45/0 (or equivalent 0/45) geometries, CIE illuminant D65,and the 1931 CIE 2-degree standard observer.}

    Color Luminance
    X1 Y1 X2 Y2 X3 Y3 X4 Y4 Min. (Y%) Max. (Y%)
    White .303 0.287 0.368 0.353 0.34 0.380 0.274 0.316 15 --
    Red .613 0.297 0.708 0.292 0.636 0.364 0.557 0.352 2.5 11

    The four pairs of chromaticity coordinates determine the acceptable color in terms of the CIE 1931 Standard Colorimetric System measured with CIE Standard Illuminant D65.


1-800-839-9018  |  2240 72nd Terrace E.  |   Sarasota, FL  |  34243