Engineer Grade Reflective Sheeting is a high-quality, durable enclosed lens retro reflective material. This reflective sheeting offers exceptional value for permanent traffic signage applications. Meets applicable requirements for engineer grade sheeting application for Type I retro reflective sheeting as set forth in ASTM D 4956-99.
Construction
Face Film |
N/A High Gloss |
Adhesive |
N/A Permanent Pressure Sensitive (Class 1) |
Liner |
N/A White Polyethylene Coated Paper StaFlat |
Specifications
Outdoor Durability |
N/A R400 or R300 are warranted for 7 years (3 years for orange) when properly processed and applied. |
Mini. Surface & Ambient Air Application Temperature |
N/A 40°F (4° C) when applied with a squeeze roll applicator |
Application Surface |
N/A Flat surfaces only. Not recommended for unpainted stainless steel. Always pretest your specific substrate prior to application. Note: Wet method of application is not recommended for R400 or R300 reflective sheeting. |
Service Temperature Range |
N/A -40°F to 180°F (-40°C to 82°C) |
Typical Film Caliper (w/adhesive) |
N/A 4.5 to 5.5 mils |
Shelf Life |
N/A One year when stored at the following temperature and conditions 68 - 77 °F (20 - 25 °C) and 50% ±5% R.H. |
Other Tests |
N/A R400 or R300 meet all other requirements set forth in ASTM D 4956-99 including Shrinkage, Flexibility, Liner removal, Adhesion, Impact resistance, Specular gloss, and Outdoor weathering (Type I). |
Photometric Performance
N/A
|
Colors & Specification Limits (Daytime)
N/A
|