PM200 is a UL-recognized/CSA-accepted 2.0 mil ink-receptive white polyester coated with an aggressive, high-performance, permanent pressure-sensitive acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner.

Unit of Measure


Film Thickness

N/A 2.0 mil (51 micron) ±10%

Adhesive Thickness

N/A 0.9-1.0 mil (23-25 micron) ±0.1 (3)

Liner Thickness

N/A 3.1 mils (79 micron) ±10%

Dimensional Stability (%)

N/A No Shrinkage observed


N/A 460 gm/sq cm

Expected Exterior Life

N/A Two years

Service Temperature Range

N/A -40°F to 302°F (-40°C to 150°C)

Minimum Application Temperature

N/A 50°F (10°C)

Storage Stability

N/A Two years when stored at 70°F (21°C) and 50% relative humidity

Adhesion Properties

Ultimate Peel from Stainless Steel

N/A 55 oz/in (605 N/m)

Ultimate Peel from Acrylic

N/A 61 Oz/in (671 N/m)

Ultimate Peel from Glass

N/A 56 oz/in (616 N/m)

Ultimate Peel from Polyethylene

N/A 35 oz/in (385 N/m)

Expected Shear

N/A 100+ hours